TEAC TASCAM 133
¥ 149,000 (released in 1981)
Commentary
An AV cassette deck with a stereo audio track and a cue track for projector control.
It is useful for multi-image programming of video and audio.
System control using a microprocessor is adopted.
Tape speeds are available in 9.5 cm (High) and 4.8 cm (STD).
Simulsync recording is possible.
With the built-in OSC Cue Pulse, auto present (Oatley Peat) is possible at any tape position.
The meter section consists of three meters, two VU meters and one peak meter.
Equipped with a headphone port that can be controlled independently.
Equipped with Dolby NR system.
It is equipped with a for connecting an external noise reduction system (such as dbx).
Equipped with a switch that can change the output level in 2 steps of -10dB/0dBV.
Equipped with meter and output level linked volume.
The tape is compatible with Co (CrO2) tape.
A remote controller capable of Cue Pulse recording was sold separately.
The rack handle in the picture is optional and sold separately.
Model Rating
Type | Cassette deck | ||||
Track format | 4 tracks, 3 channels | ||||
Heads | 2 | ||||
Tape used | C-60 ~ C-90, Co (CrO2) Type | ||||
Tape speed | 9.5 cm, 4.8 cm | ||||
Motor | For Capstan : Electronically Controlled 2 Speed DC Motor For Reel : DC Motor |
||||
Drive system | Single capstan | ||||
Wow & flutter (WRMS) | 9.5cm:0.04% 4.8cm:0.06% |
||||
Early winding time | 90 seconds or less (C-60 tape) | ||||
Frequency characteristic (Co (CrO2) Tape) |
|
||||
Overall signal-to-noise ratio | 9.5/4.8 cm : 55 dB (3% THD level, WTD) | ||||
Headroom | + 17 dB from 0 VU | ||||
Input Sensitivity / Impedance |
|
||||
Output Level / Impedance |
|
||||
Pwer | 100 VAC, 50Hz/60Hz | ||||
Power consumption | 35W | ||||
External dimensions | Width 482x Height 147x Depth 345 mm Without Rack Angle : Width 440 mm |
||||
Weight | 9kg | ||||
Sold Separately | Remote Control Unit RC-133 (¥ 10,500) Rack Handle AH-50 (¥ 2,500) |