Audio Database
FC3000
Commentary

This speaker system is based on Aisin Takaoka's cast iron technology.

A 18 cm cone woofer manufactured by ScanSpeak is installed in the low range.
Non-press pulp cone is used for the diaphragm of this unit.

A 2.8 cm soft dome tweeter made by Dinavio is installed in the high range.

The network section uses parts that emphasize sound quality, such as a large OFC air-core coil.
The network is also designed to minimize the effects of magnetic fields and currents. In addition, the high-frequency and low-frequency networks are divided into two independent boards, which are mounted asymmetrically to the left and right inside the enclosure to prevent interference.
All contacts are caulked to eliminate solder alloy interference in consideration of minute signal flow.

The enclosure uses a bass reflex system.
The FC3000 has a mounting ring made of high carbon cast iron and an adjustable pendulum. The bass reflex port is equipped with a vibration control sheet coated with cast iron powder. By combining this structure with solid wood of walnut, vibration control and sound are matched according to the construction source, and sound without accompanying sound is realized. In addition, the graphite content of the mounting ring and the adjustable pendulum is changed according to the application, and each effect is enhanced.
High-density conifer MDF is used for the plate material. Both sides are a composite structure of 22 mm thick MDF and 17 mm thick solid walnut. The remaining four sides are 24 mm thick. In addition, the front, back, left, and right baffles are tilted to prevent standing waves and ensure time alignment.
The exterior features a black piano finish and a lustrous walnut finish.

Equipped with a speaker terminal for bi-wiring.

There was FST-60H as a recommended stand sold separately.
FST-60H comes with a spike plate PTS-F.

Model Rating
Method 2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type
Units Used For low band : 18 cm cone type
For high-pass : 2.8 cm dome type
Frequency characteristic 40 Hz to 30 kHz
Impedance 8 Ω
Output sound pressure level 88dB
Max Input 120W
Crossover frequency 2.5kHz/12dB
External dimensions Width 285x Height 415x Depth 374 mm
Weight 20kg
Sold separately : Speaker Stand FST-60H (1 unit, ¥ 50,000)
External dimensions Height : 60 cm
Tabletop : 24x29cm
Base plate : 36x42cm
Spike Plate : Diameter 40x Height 16 mm
Weight Stand Body : 28 kg
Spike Plate : 130g