SANSUI SAX-100
¥ 36,700 (around 1964)
Commentary
FM/AM receiver compatible with FM stereo broadcast transmission.
A nominal power tube 6BQ5 is used for the outputs, and low distortion and high damping factor are realized by combining current positive feedback and voltage negative feedback.
Four transistors are used in the head amplifier section.
Equipped with FM multiplex circuit, compatible with FM stereo broadcast transmission.
Uses a friction tone control that can be adjusted separately on the left and right.
Terminal for capacitor tweeter is mounted.
Model Rating
Type | Integrated amplifier |
Maximum power output | 6W+6W |
Frequency characteristic | 30 Hz to 50 kHz |
Input / output terminal | Phono MAG:3.2mV Phono X-tal:70mV Tape:2.7mV Aux(Tape mon):140mV Rec |
Tone control | CR Type |
Equalizer | NF Type |
Sensitivity | FM : 3.5 μ V AM : 50 μ V |
FM multi-separation | 35 dB (Distortion Factor 1% or Less) |
FM frequency characteristics | 50 Hz to 15 kHz |
Accessory circuit | Loudness control Scratch rumble filter Tape monitor FM-AFC FM stereo indicator |
Vacuum tubes and diodes used | 6BQ5 and others, 13 vacuum tubes, 17 semiconductors. |
External dimensions | Width 436x Height 147x Depth 343 mm |
Weight | 12.5kg |