NIKKO STA-701B
¥ 68,500 (around the early 1970 s?)
Commentary
STA Series high power FM/AM receiver.
NIKKO's audio linear IC is used in the equalizer amplifier section to improve various characteristics.
The power supply voltage is increased to expand the dynamic range.
A newly developed low-distortion high-power transistor realizes a 50W music power.
A low-distortion ultra-straight double-diffused transistor is used for the output circuit that affects sound quality.
Adopts NIKKO's newly developed DC balance circuit.
The front-end of the FM tuner uses a dual-gate FET to improve performance.
A monolithic IC is used for the IF stage, enabling high sensitivity, high selectivity and wide-band amplification.
It uses an automatic switching type FM multiplex circuit. When a stereo signal is received, it automatically switches to stereo and the stereo signal indicator lights up.
A muting circuit is installed to reduce background noise during channel selection.
The AM tuner section also uses FET to improve the characteristics.
A NW-type circuit breaker developed by NIKKO is used for the protection circuit.
Model Rating
Type | Stereo receiver |
FM Tuner Section | |
Receiving frequency | 76 MHz to 90 MHz |
Sensitivity (IHF) | 1.8 μ V |
Image Ratio (83 mhz) | 60dB |
S/N(83MHz) | 55dB |
Capture ratio | 3dB |
FM multi-separation | 40dB |
<AM Tuner Section> | |
Receiving frequency | 535 kHz to 1,605 kHz |
Amplifier Unit | |
Music power | 70W (35W + 35W, 8 Ω) |
Effective output (single-channel operation) | 25W/25W (8 Ω) 16W/16W (16 Ω) |
Frequency Response (IHF) | 15 Hz to 50 kHz ± 1 dB |
Power Response | 20 Hz to 20 kHz -1dB |
Distortion factor | 0.8% or Less (Actual Output) 0.2% or Less (at 1W output) |
IM distortion factor | Not more than 1.0% |
Input Sensitivity / Impedance | Phono MAG : 2.8mV/50k Ω Tape head : 1.8mV/200k Ω Aux1 : 200mV/250k Ω Aux2 : 500mV/1M Ω |
S/N | Phono MAG:60dB Tape head:55dB Aux:65dB |
Tone control | Bass : ± 15 dB (50 Hz) Treble : ± 15 dB (10 kHz) |
Load impedance | 4 Ω ~ 16 Ω |
<General> | |
Semiconductor used | FET : 2 IC : 3 Transistor : 32 Zener diode : 1 unit Diode : 24 units |
Pwer | 100 VAC / 117 V, 50Hz/60Hz |
External dimensions | Width 390x Height 127x Depth 340 mm |
Weight | 8.0kg |