Lo-D MT-100
¥ 13,000 (around 1979)
Commentary
MM type cartridge developed by inheriting the technology of the high-grade cartridge MT-202mkII.
An original one point pivot support system with good sound localization and separation is used for supporting the vibration system.
The magnetic circuit uses a samarium-cobalt disk magnet and an original C-shaped yoke with high power generation efficiency.
Magnesium alloy head shell is adopted.
Model Rating
Type | MM Type Cartridge |
Vibration system support system | One point pivot support system |
Frequency characteristic | 20 Hz to 35 kHz |
Output voltage | 4 mv (3.54cm/s, RMS45 °, 1 khz) |
Impedance | 3k Ω (1 kHz) |
DC resistance | 550 Ω |
Load resistance | 47k Ω standard |
Channel balance | 1.2 dB or Less (1 kHz) |
Channel separation | 28dB(1kHz) |
Dynamic Compliance | 9x10-6cm/dyne(100Hz) |
Needle tip | 0. 3x0. 7 mil Elliptical Needle |
Needle pressure | 1.5g ± 0.3g |
Dead weight | 16.8g (Including Head Shell Weight 9.8g) |
Exchange needle | E-100(¥6,000) |